3D Pin Inspection

With EyeVision 3D every kind of pin can be measured and checked for position and the true point.

true point & pin embedment depth

  • true point

The EyeVision 3D software can carry out a measurement of the so called true point. These are gauges to measure connector tolerances and staggering of the pins.

  • pin embedment depth

The software also can measure the embedment depth of the pins. Thanks to the 3D inspection it is possible to measure the height of the pin tips. Those are not only measured in theire x- and y-direction but also the z-direction.

  • connector flaws

Furthermore the system can detect flaws such as e.g. if the connector pins are bent, if the pins are stuck to deeply into the housing or if the pins stick out too far out of the housing.

Initiates file downloadData sheet

 

 

3D Pin Inspector

With the PinInspector 2.0 EVT has optimized a method for the inspection of connectors respectively the inspection of pins. The ready-to-use system contains:

  • spectially adapted EyeVision 3D machine vision software with a ready-made inspection-program-kit

  • lasertriangulation sensor EyeScan AT 3D

  • compact industrial PC

  • linear axis (optionally)

 With the PinInspector, the following characteristics of the scanned connector can be measured:

  1. true point

  2. pin-height

  3. flaws on the connector

Additionally EyeVision offers:

  • detailed statistics with all result values in the included SQL data bank or into the company data base.
  • complete administration of all measured and inspected characteristics in a data base for production tracking
  • integration of scanner systems for RFID or code reader (bar code, DMC, QR, OCR) for product tracing and mapping

Direct integartion of different PLCs:

  • Profinet
  • Modbus
  • Ethercat
  • etc.