Skip to content

EyeCheck 3000

SystemNVIDIA®
Jetson Xavier NXTM
Camera

GenICam standard with USB3

Networking: 10/100/1000 BASE-T Ethernet, Media Access Controller
(MAC) over M12 Connector
USB: 2 x USB3 (max. bandwidth 5 GB, shared with camera,
max. 900mA @ 5 V),
2 x MicroUSB for debug and recovery
HDMI:  HDMI 2.0a/b (up to 6Gbps), maximum resolution 3840 x
2160 at 60Hz (up to 32bpp)
Inputs: 1 x Hardware Trigger, opto-decoupled
1 x Input to NVIDIA SoM, opto-decoupled
Outputs: 4 x PWM 48V/2.5A, 1 x synchronized for flash, 3 x non
synchronized, opto-decoupled
UART: 1 x RS232, Rx/Tx only

Sensor

Sony IMX250 Gen2

Sensor Type: 2/3″ progressive scan CMOS
Shutter: Global Shutter
Auflösung: 2448 x 2048 pixels
Scan Area: 8.44 mm x 7.06 mm
Pixel Size: 3.45 µm x 3.45 µm

Image Signal Processor (ISP) FPGA based for machine vision
Hardware TriggerFPGA based for high speed/accurate image triggering
LEDFPGA based on trigger for syncronisation mit high speed,
high power circuit, up to 2.5A @ 48 V
OSLinux®
based on Ubuntu 18.04 und NVIDIA® L4T 32.4.4