EyeScan LTZ 3D sensor

The EyeScan LTZ 3D sensor is a compact and fast laser triangulation sensor with Dual-Core ARM processor and FPGA for fast preprocessing of the data. It supports the EyeVision 3D software.

Data sheet

Specification

LaserClass 2, wave length 450 nm, < 100mW average
SensorCMOS 1/2.9″ sony IMX273LLR, monochrome
Active Pixel1408 (H) x 1080 (V)
Pixel size3.45 (H) x 3.45 (V) μm

 

EyeScan LTZ 3D Models

EyeScan LTZ 3D(8/30)
regular
(8/34)
regular
(8/30)
large
(8/34)
large
(8/30)
xlarge
(8/34)
xlarge
(8/30)
xxlarge
(8/34)
xxlarge
(6/32)
regular
Min. distance Z (mm)908017015028524546040070
Max. distance Z (mm)24519547037578562512851020285
Min. horiz. FoV X (mm)656513012021520035032580
Max. horiz. FoV X (mm)150125295240495400810660230
Resolution X Min [μm]605011010017016028026070
Resolution X Max [μm]120100240190390320640520190
Resolution Z Min [μm]101020203030404010
Resolution Z Max [μm]403080601309022015070

 

Technical Data

Active Sensor Size4.8 (H) x 3.7 (V) mm
High-speed Shutter1 μs + steps of 1 μs
IntegrationGlobal Shutter
Data aquisitionProgram-controlled or external high speed trigger, full-frame up to
174 frames per second, jitterfree acquisition
A/D conversion10 bit, 8 bits used after LUT application
Input LUT1024 x 8 bits
Image DisplayVia Ethernet onto PC
ProcessorDual-Core ARM Cortex A9 with 866MHz and integrated FPGA
FPGALaser line processing during image acquisition in FPGA
RAM512 MB DDR-SDRAM
Flash EPROM16 GB flash memory (nonvolatile) industrial eMMC
Encoder InputsYes, and encoder inputs can be used as additional 5-24V inputs
Trigger InputEncoder Signal A can be used as trigger input
Ethernet Interface1Gbit / 100 Mbit / 10 Mbit
Storage Conditions-20 .. +60 °C, Max. humidity: 90 %, non-condensing
Operating Conditions0 .. +50 °C, Max. humidity: 80 %, non-condensing
Power Supply24V DC, 300 mA without I/O usage
Power Consumption7.2 W typical without I/O usage
Consent Management Platform by Real Cookie Banner