EyeSens Bottle Inspect

EyeSens BottleInspect (BI) contains various commands, which are important for the quality control during the production in the bottling industry. No matter if it is the cap inspection, the label or the cork - EyeSens BI has the easy and customerfriendly solution.

EyeSens BI web interface and commands

For using the EyeSens BI no additional software has to be installed on the PC or tablet. The user is given an IP address by which he can connect to the smart camera on the sensor via any web browser.

Up until now 7 prefabricated inspection programs are accessible via the web interface. This are commands for inspection of the cap, the label and the cork as well as the bottle finish.


Also the teach-in of the component parts is graphically created. The user can configure various objects via different icons and therefore create his individual inspection program.

The commands

 

Specification

Sensor Size:1/3" CMOS
Resolution:736 x 480, 1024 x 768, 1280 x 1024
FPS / Hz:60 Hz
CPU / GHz:0,6 GHz

 Optical data

Integrated measurement illumination:8 LEDs
Integrated lens, focal length: 6, 12 or 25 mm

 Electrical data

Digital I/O: 1/3-4 and additional, 4 free
Interfaces:Ethernet (LAN), RS232 or RS422
Max. output current:50 mA
Operating voltage:24V DC (-25%/ +10%)

Mechanical data

Length x Width x Height:65 x 45 x 45 mm
Weigth:ca. 160 g
Plug connection:

Power and I/O M12 12-pin, Ethernet M12 4-pin, Data M12 5-pin

Housing:Aluminium, plastic